Language

Your Searchresult for: Vacuum forming tools
ebaboard - board material Material attributes Density at 20°C Coefficient of linear expansion
ebaboard S-1

Downloads:
  • very fine structure
  • high strength values
  • very good edge strength
  • high heat resistance
  • good resistance against solvent
  • very well workable (contains no abrasive fillers)
0,70 ± 0,02 ca. 62
ebablock - blockmaterial Material attributes Density at 20°C Coefficient of linear expansion
ebablock 1050

Downloads:
  • well workable
  • fine structure
  • low density
  • low coefficient of linear expansion
1,05 ± 0,02 ca 60
ebablock W

Downloads:
  • high strength
  • wear resistant
  • fine structure
  • low thermal expansion
  • well workable
1,76 ± 0,03 ca. 50
Fast casting resins, unfilled Material attributes Pot life 200 g / 20°C Curing time at RT
SG 130 / PUR 11

Downloads:
  • unfilled
  • impact resistant
  • high strength
2,5 - 3,5 0,5 - 1,5
SG 2000 / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
2,5 - 3,5 0,5 - 1
SG 2000 S / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
1,5 - 2,5 0,25 - 0,5
SG 2000 L / Komp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
7 - 8 1 - 1,5
Fast casting resins, filled Material attributes Pot life 200 g / 20°C Viscosity at 25°C
ebatemp / PUR 5

Downloads:
  • very smooth surface
  • polishable
  • well castable
  • well workable
  • aluminium filled
4,5 - 5,5 1300 ± 300
ebatemp / PUR 5

Downloads:
  • very smooth surface
  • polishable
  • well castable
  • well workable
  • aluminium filled
4,5 - 5,5 1500 ± 400
General purpose and laminating resins Material attributes Heat resistance (HDT) Pot life 200 g / 20°C
AH 110 / TGL

Downloads:
  • unfilled
  • high strength
  • high heat resistance
  • medium viscosity
101 ± 3 55 - 65
LH 28-1 / TM

Downloads:
  • very high heat resistance, depending on post curing till 175 °C
  • long processing time
  • low exothermic character
  • heat curing
175 ± 3 240 - 360
Epoxy casting resins Material attributes Compressive strength Heat resistance (HDT)
GH 705 / TL

Downloads:
  • high heat resistance
  • aluminium-like
80 ± 5 91 ± 3
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 35 / CH-1

Downloads:
  • chemical resistant
  • polishable
  • grinding possible
  • dense surface
  • heat resistant
98 ± 3 105 ± 10
OH 38 / CH-1

Downloads:
  • chemical resistant
  • polishable
  • low shrinkage
  • dense surface
  • aluminium-like
  • good heat resistance
100 ± 3 110 ± 10
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 05/ TLB

Downloads:
  • low shrinkage
  • soft
  • heat resistant
1,10 ± 0,05 105 ± 5
Reinforcing pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 07-1 / TM

Downloads:
  • heat resistant
  • glassfibre filled
  • aluminium filled
1,90 ± 0,08 175 ± 5
PS 08 / TL

Downloads:
  • aluminium filled
  • glassfibre filled
  • air permeable
1,75 ± 0,05 80 ± 3
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40