Language

Your Searchresult for: Styling models
ebaboard - board material Material attributes Density at 20°C coefficient of thermal expansion
ebaboard L-1

Downloads:
  • good compressive strength
  • very fine structure
  • good edge strength
  • very well workable (contains no abrasive fillers)
0,45 ± 0,02 ca. 60
ebazell - foam boards Material attributes Density at 20°C Compressive strength parallel
ebazell 50

Downloads:
  • very well workable
  • very low weight
0,05 ± 0,005
ebazell 80

Downloads:
  • fine structure
  • very well workable (contains no abrasive fillers)
0,08 ± 0,005 0,86
ebazell 160

Downloads:
  • very fine structure
  • very well workable (contains no abrasive fillers)
0,163 ± 0,012 2,6
ebazell 260

Downloads:
  • very fine structure
  • very well workable (contains no abrasive fillers)
  • dimensionally stable
0,25 ± 0,01 4,8
Fast casting resins, unfilled Material attributes Pot life 200 g / 20°C Curing time at RT
SG 131 / PUR 11

Downloads:
  • unfilled
  • long processing time
  • high impact strength
9 - 15 5 - 8
SG 2000 / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
2,5 - 3,5 0,5 - 1
Fast casting resins, filled Material attributes Pot life 200 g / 20°C Viscosity at 25°C
SG 700 / PUR 5

Downloads:
  • well castable
  • fine structure
  • dimensionally accurate
  • fast curing
  • versatile
5 - 6 900 ± 100
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 20 / CH-1

Downloads:
  • fine structure
  • jointless surface
  • very well workable
  • well spreadable
72 ± 3 48 ± 3
OH 20 / CH-2

Downloads:
  • well spreadable
  • very well workable
  • fine structure
  • jointless surface
41 ± 3
OH 20 / CH-2 gel

Downloads:
  • well workable
  • fine structure
  • jointless surface
  • well spreadable
41 ± 3
Modelling and lay-up pastes Material attributes Density at 20°C Shore hardness
P 22 / P 22

Downloads:
  • good manual modelling
  • dimensionally accurate
  • very well workable
  • long processing time
0,50 ± 0,03