Language

Your Searchresult for: Foam and RIM tools
ebaboard - board material Material attributes Density at 20°C coefficient of thermal expansion
ebaboard 1050

Downloads:
  • well workable
  • fine structure
  • low density
  • low coefficient of thermal expansion
1,05 ± 0,02 ca. 60
ebaboard 1204

Downloads:
  • high abrasion resistance
  • impact resistant
  • dense surface
  • good edge strength
1,20 ± 0,02 ca. 77
ebaboard PW 920

Downloads:
  • very well workable (contains no abrasive fillers)
  • good edge strength
  • high quality surface
  • dense surface
  • high impact strength
  • very low generation of dust during machining
  • low coefficient of thermal expansion
1,22 ± 0,03 ca. 87
ebablock - blockmaterial Material attributes Density at 20°C coefficient of thermal expansion
ebablock 1050

Downloads:
  • well workable
  • fine structure
  • low density
  • low coefficient of thermal expansion
1,05 ± 0,02 ca 60
Fast casting resins, unfilled Material attributes Pot life 200 g / 20°C Curing time at RT
SG 130 / PUR 11

Downloads:
  • unfilled
  • impact resistant
  • high strength
2,5 - 3,5 0,5 - 1,5
SG 2000 / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
2,5 - 3,5 0,5 - 1
Fast casting resins, filled Material attributes Pot life 200 g / 20°C Viscosity at 25°C
SG 700 / PUR 5

Downloads:
  • well castable
  • fine structure
  • dimensionally accurate
  • fast curing
  • versatile
5 - 6 900 ± 100
Epoxy casting resins Material attributes Compressive strength Heat resistance (HDT)
GH 706 / GL

Downloads:
  • abrasion resistant
  • fine structure
  • good compressive strength
  • very hard
  • wear resistant
  • well castable
  • castable up to 30 mm
104 ± 4 67 ± 2
GH 760 / GL

Downloads:
  • dimensionally accurate
  • abrasion resistant
  • high strength
  • castable until 40 mm
  • very good sliding properties
120 ± 10 63 ± 2
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 35 / CH-1

Downloads:
  • chemical resistant
  • polishable
  • grinding possible
  • dense surface
  • heat resistant
98 ± 3 105 ± 10
Polyurethane gel coats Material attributes Wear jet test Heat resistance (HDT)
OH 11 / PUR 3

Downloads:
  • abrasion resistant
  • impact resistant
  • excellent demoulding from mould and core sand properties
  • polyurethane-based
ca. 233 70 ± 2
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 02 / BRIL

Downloads:
  • glassfibre filled
1,05 ± 0,02


Downloads:
  • glassfibre filled
1,05 ± 0,02
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40