Language

Your Searchresult for: Prototyping Moulds for RIM processing
ebaboard - board material Material attributes Density at 20°C coefficient of thermal expansion
ebaboard PW 920

Downloads:
  • very well workable (contains no abrasive fillers)
  • good edge strength
  • high quality surface
  • dense surface
  • high impact strength
  • very low generation of dust during machining
  • low coefficient of thermal expansion
1,22 ± 0,03 ca. 87
ebaboard 1400

Downloads:
  • low thermal expansion
  • high abrasion resistance
  • fine structure
  • well workable
1,38 ± 0,03 ca. 69
ebaboard 1700

Downloads:
  • good heat resistance
  • low thermal expansion
  • good edge strength
  • high quality surface
  • well workable
1,70 ± 0,02 ca. 45
Fast casting resins, filled Material attributes Pot life 200 g / 20°C Viscosity at 25°C
SG 700 / PUR 5

Downloads:
  • well castable
  • fine structure
  • dimensionally accurate
  • fast curing
  • versatile
5 - 6 900 ± 100
General purpose and laminating resins Material attributes Heat resistance (HDT) Pot life 200 g / 20°C
AH 100 / GL

Downloads:
  • unfilled
  • skin friendly
  • nearly odourless
  • good wet-out characteristics
45 - 55
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 35 / CH-1

Downloads:
  • chemical resistant
  • polishable
  • grinding possible
  • dense surface
  • heat resistant
98 ± 3 105 ± 10
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 02 / BRIL

Downloads:
  • glassfibre filled
1,05 ± 0,02
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40