Language

Your Searchresults:
ebaboard - board material Material attributes Density at 20°C coefficient of thermal expansion
ebaboard L-1

Downloads:
  • good compressive strength
  • very fine structure
  • good edge strength
  • very well workable (contains no abrasive fillers)
0,45 ± 0,02 ca. 60
ebazell - foam boards Material attributes Density at 20°C Compressive strength parallel
ebazell 50

Downloads:
  • very well workable
  • very low weight
0,05 ± 0,005
ebazell 80

Downloads:
  • fine structure
  • very well workable (contains no abrasive fillers)
0,08 ± 0,005 0,86
ebazell 160

Downloads:
  • very fine structure
  • very well workable (contains no abrasive fillers)
0,163 ± 0,012 2,6
ebazell 260

Downloads:
  • very fine structure
  • very well workable (contains no abrasive fillers)
  • dimensionally stable
0,25 ± 0,01 4,8
Adhesives, repair putty and casting resins Material attributes Pot life 150 g / 20°C Density at 20°C
Adhesive brown

Downloads:
  • no sagging at vertical surfaces
  • excellent filling properties
  • Shore D hardness approx. 65
15 - 20 0,80 ± 0,03
Fast casting resins, unfilled Material attributes Pot life 200 g / 20°C Curing time at RT
SG 130 / PUR 11

Downloads:
  • unfilled
  • impact resistant
  • high strength
2,5 - 3,5 0,5 - 1,5
SG 2000 / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
2,5 - 3,5 0,5 - 1
Fast casting resins, filled Material attributes Pot life 200 g / 20°C Viscosity at 25°C
SG 700 / PUR 5

Downloads:
  • well castable
  • fine structure
  • dimensionally accurate
  • fast curing
  • univeral useable
5 - 6 900 ± 100
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 4 / SL

Downloads:
  • univeral useable
  • longer processing time
  • very good spreadable
  • impact resistant surface
  • easy to grind
- 95 ± 5
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 02 / BRIL

Downloads:
  • glassfibre filled
1,05 ± 0,02


Downloads:
  • glassfibre filled
1,05 ± 0,02
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40
Modelling and lay-up pastes Material attributes Density at 20°C Shore hardness
P 22 / P 22

Downloads:
  • good manual modelling
  • dimensionally accurate
  • very well workable
  • long processing time
0,50 ± 0,03
Silicones - condensation curing Material attributes Shore hardness Tensile strength / test piece type 2
Silicone thin liquid

Downloads:
  • condensation curing
  • well castable
  • low viscosity
  • in-mould releasing
21 ± 2 2,7 ± 0,5
Silicone high solid

Downloads:
  • condensation curing
  • high strength
  • in-mould releasing
  • flexible
23 ± 3 3,3 ± 0,5
Fast - curing polyester putty Material attributes Density at 20°C Shore hardness
Fast curing modelpaste

Downloads:
  • fine structure
  • very well workable
  • fast curing
1,25 ± 0,03
Release agents and mould sealers Material attributes Heat resistance (HDT)
Primer G1 for ebazell boards

Downloads:
    Synthetic gypsum Material attributes Pot life 200 g / 20°C Density at 20°C
    ebacryl L-1* / EM-1*

    Downloads:
    • free of shrinkage
    • low thermal expansion
    • low exothermic character
    • no restriction in thickness of laminates
    • tools can be washed with water
    • no health and safety problems
    • Can be cast bubble free
    ca. 35 1,7 ± 0,05
    ebacryl O-1 / SP-1

    Downloads:
    • free of shrinkage
    • low thermal expansion
    • low exothermic character
    • tools can be washed with water
    • no health and safety problems
    12 - 18 1,9 ± 0,2
    ebacryl Paste P-1

    Downloads:
    • dimensionally accurate
    • high temperature resistance
    • high flexural strength
    • low thermal expansion
    • economical
    • no health and safety problems
    12 - 18 1,9 ± 0,2
    Accessories Material attributes
    Fast adhesive AD 51

    Downloads: