Language

Your Searchresult for: Composite moulds
ebaboard - board material Material attributes Density at 20°C Coefficient of linear expansion
ebaboard L-1

Downloads:
  • good compressive strength
  • very fine structure
  • good edge strength
  • very well workable (contains no abrasive fillers)
0,45 ± 0,02 ca. 60
ebaboard EP 978

Downloads:
  • very fine surface structure
  • good milling
  • very good dimension stability
  • very high heat resistance
  • low coefficient of linear expansion
0,68 ± 0,02
ebablock - blockmaterial Material attributes Density at 20°C Coefficient of linear expansion
ebablock EP 138

Downloads:
  • heat resistant till 140°C
  • low coefficient of linear expansion
  • very fine surface structure
  • good dimension stability
  • very well workable
0,82 ± 0,02 ca. 35 - 45
ebablock P 185

Downloads:
  • low thermal expansion
  • high heat resistance
  • big volume blocks available
  • well workable
  • self-extinguishing according to UL 94 V0, FileE191776
1,86 ± 0,05 ca. 39
General purpose and laminating resins Material attributes Heat resistance (HDT) Pot life 200 g / 20°C
AH 100 / TG

Downloads:
  • unfilled
  • low cost
  • low viscosity
- 40 - 50
AH 110 / TL

Downloads:
  • unfilled
  • high strength
  • high heat resistance
  • medium viscosity
100 ± 3 85 - 95
LH 22 / GL

Downloads:
  • dimensionally accurate
  • long potlife
  • low exothermic character
64 ± 2 40 - 45
LH 28-1 / TM

Downloads:
  • very high heat resistance, depending on post curing till 175 °C
  • long processing time
  • low exothermic character
  • heat curing
175 ± 3 240 - 360
LH 30 resin+hardener

Downloads:
  • medium viscosity
  • low exothermic character
  • heat curing
  • very high heat resistance
  • long processing time
181 ± 5 160 - 200
BLH Epoxy 200 / W 400

Downloads:
  • hardener W 400 is miscible with hardeners W 15 and K 25
  • heavy duty bonded fabrics
  • excellent soaking of glass fibre cloth
  • excellent soaking of carbon fibre cloth
  • low viscosity
  • certified according to "Germanischer Lloyd"
BLH Epoxy 200 / K 25

Downloads:
  • low viscosity
  • good curing at room temperature
  • excellent soaking of aramid fibre cloth
  • excellent soaking of glass fibre cloth
  • excellent soaking of carbon fibre cloth
  • certified according to "Germanischer Lloyd"
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 30 / resin + hardener

Downloads:
  • low exothermic character
  • longer processing time
  • very high heat resistance
  • heat curing
> 170 107 ± 7
OH 35 / CH-1

Downloads:
  • chemical resistant
  • polishable
  • grinding possible
  • dense surface
  • heat resistant
98 ± 3 105 ± 10
OH 50 / Hardener 03

Downloads:
  • styrene resistant
  • chemical resistant
  • very dense surface
  • polishable
  • good heat resistance
93 ± 3 110 ± 10
OH 82 / TM

Downloads:
  • very low thermal expansion
  • very high heat resistance
  • dimensionally accurate
175 ± 5 105 ± 7
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2
PS 05/ TLB

Downloads:
  • low shrinkage
  • soft
  • heat resistant
1,10 ± 0,05 105 ± 5
Reinforcing pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 06 / TL

Downloads:
  • heat resistant
  • good conductivity
  • good compressive strength
  • glassfibre filled
  • aluminium filled
1,90 ± 0,05 120 ± 5
PS 07-1 / TM

Downloads:
  • heat resistant
  • glassfibre filled
  • aluminium filled
1,90 ± 0,08 175 ± 5
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40
KP 7-1 / TM

Downloads:
  • high heat resistance
  • aluminium filled
240 - 360
Modelling and lay-up pastes Material attributes Density at 20°C Shore hardness
P 26 / resin + hardener

Downloads:
  • 10 - 35 mm layer possible in one step
  • low exothermic
  • dimensionally stable
  • very well workable
  • fine structure
  • no sagging at vertical surfaces
0,75 ± 0,03
Synthetic gypsum Material attributes Pot life 200 g / 20°C Density at 20°C
ebacryl L-1* / EM-1*

Downloads:
  • free of shrinkage
  • low thermal expansion
  • low exothermic character
  • no restriction in thickness of laminates
  • tools can be washed with water
  • no health and safety problems
  • Can be cast bubble free
ca. 35 1,7 ± 0,05