Language

Your Searchresult for: Composites moulds
ebablock - blockmaterial Material attributes Density at 20°C Coefficient of linear expansion
ebablock P 185

Downloads:
  • low thermal expansion
  • high heat resistance
  • big volume blocks available
  • well workable
  • self-extinguishing according to UL 94 V0, FileE191776
1,86 ± 0,05 ca. 39
General purpose and laminating resins Material attributes Heat resistance (HDT) Pot life 200 g / 20°C
AH 100 / TG

Downloads:
  • unfilled
  • low cost
  • low viscosity
- 40 - 50
AH 110 / TL

Downloads:
  • unfilled
  • high strength
  • high heat resistance
  • medium viscosity
100 ± 3 85 - 95
LH 22 / GL

Downloads:
  • dimensionally accurate
  • long potlife
  • low exothermic character
64 ± 2 40 - 45
LH 28-1 / TM

Downloads:
  • very high heat resistance, depending on post curing till 175 °C
  • long processing time
  • low exothermic character
  • heat curing
175 ± 3 240 - 360
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 30 / resin + hardener

Downloads:
  • low exothermic character
  • longer processing time
  • very high heat resistance
  • heat curing
> 170 107 ± 7
OH 35 / CH-1

Downloads:
  • chemical resistant
  • polishable
  • grinding possible
  • dense surface
  • heat resistant
98 ± 3 105 ± 10
OH 50 / Hardener 03

Downloads:
  • styrene resistant
  • chemical resistant
  • very dense surface
  • polishable
  • good heat resistance
93 ± 3 110 ± 10
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2
PS 05/ TLB

Downloads:
  • low shrinkage
  • soft
  • heat resistant
1,10 ± 0,05 105 ± 5
Reinforcing pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 06 / TL

Downloads:
  • heat resistant
  • good conductivity
  • good compressive strength
  • glassfibre filled
  • aluminium filled
1,90 ± 0,05 120 ± 5
PS 07-1 / TM

Downloads:
  • heat resistant
  • glassfibre filled
  • aluminium filled
1,90 ± 0,08 175 ± 5
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40
KP 7-1 / TM

Downloads:
  • high heat resistance
  • aluminium filled
240 - 360
Synthetic gypsum Material attributes Pot life 200 g / 20°C Density at 20°C
ebacryl L-1* / EM-1*

Downloads:
  • free of shrinkage
  • low thermal expansion
  • low exothermic character
  • no restriction in thickness of laminates
  • tools can be washed with water
  • no health and safety problems
  • Can be cast bubble free
ca. 35 1,7 ± 0,05