Language

Your Searchresult for: Moulds for Gypsum,
Concrete and Ceramics
ebaboard - board material Material attributes Density at 20°C coefficient of thermal expansion
ebaboard PW 920

Downloads:
  • very well workable (contains no abrasive fillers)
  • good edge strength
  • high quality surface
  • dense surface
  • high impact strength
  • very low generation of dust during machining
  • low coefficient of thermal expansion
1,22 ± 0,03 ca. 87
Polyurethane - casting resins flexible Material attributes Shore hardness Tensile strength / test piece type 2
GM 951-1 / Comp. A+B

Downloads:
  • shore A hardness 45
  • well castable
  • good tear propagation resistance
  • RoHS conform
45 ± 3 2,0 ± 0,2
General purpose and laminating resins Material attributes Heat resistance (HDT) Pot life 200 g / 20°C
AH 100 / TG

Downloads:
  • unfilled
  • low cost
  • low viscosity
- 40 - 50
Epoxy casting resins Material attributes Compressive strength Heat resistance (HDT)
GH 706 / GL

Downloads:
  • abrasion resistant
  • fine structure
  • good compressive strength
  • very hard
  • wear resistant
  • well castable
  • castable up to 30 mm
104 ± 4 67 ± 2
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 02 / BRIL

Downloads:
  • glassfibre filled
1,05 ± 0,02


Downloads:
  • glassfibre filled
1,05 ± 0,02
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40