Language

Your Searchresult for: Cubing models / Master models
ebaboard - board material Material attributes Density at 20°C Coefficient of linear expansion
ebaboard L-1

Downloads:
  • good compressive strength
  • very fine structure
  • good edge strength
  • very well workable (contains no abrasive fillers)
0,45 ± 0,02 ca. 60
ebaboard 60-1

Downloads:
  • fine structure
  • high strength values
  • good edge strength
  • high heat resistance
  • good resistance against solvent
  • very well workable (contains no abrasive fillers)
0,60 ± 0,02 ca. 53
ebaboard S-1

Downloads:
  • very fine structure
  • high strength values
  • very good edge strength
  • high heat resistance
  • good resistance against solvent
  • very well workable (contains no abrasive fillers)
0,70 ± 0,02 ca. 62
ebaboard 1050

Downloads:
  • well workable
  • fine structure
  • low density
  • low coefficient of linear expansion
1,05 ± 0,02 ca. 60
ebablock - blockmaterial Material attributes Density at 20°C Coefficient of linear expansion
ebablock 1050

Downloads:
  • well workable
  • fine structure
  • low density
  • low coefficient of linear expansion
1,05 ± 0,02 ca 60
ebablock P 185

Downloads:
  • low thermal expansion
  • high heat resistance
  • big volume blocks available
  • well workable
  • self-extinguishing according to UL 94 V0, FileE191776
1,86 ± 0,05 ca. 39
Epoxy gel coats Material attributes Heat resistance (HDT) Compressive strength
OH 20 / CH-2 gel

Downloads:
  • well workable
  • fine structure
  • jointless surface
  • well spreadable
41 ± 3
Modelling and lay-up pastes Material attributes Density at 20°C Shore hardness
P 22 / P 22

Downloads:
  • good manual modelling
  • dimensionally accurate
  • very well workable
  • long processing time
0,50 ± 0,03
P 26 / resin + hardener

Downloads:
  • 10 - 35 mm layer possible in one step
  • low exothermic
  • dimensionally stable
  • very well workable
  • fine structure
  • no sagging at vertical surfaces
0,75 ± 0,03
Fast - curing polyester putty Material attributes Density at 20°C Shore hardness
Fast curing modelpaste

Downloads:
  • fine structure
  • very well workable
  • fast curing
1,25 ± 0,03