Language

Your Searchresult for: Jigs
ebaboard - board material Material attributes Density at 20°C Coefficient of linear expansion
ebaboard 1050

Downloads:
  • well workable
  • fine structure
  • low density
  • low coefficient of linear expansion
1,05 ± 0,02 ca. 60
ebaboard 1200

Downloads:
  • low thermal expansion
  • good edge strength
  • high quality surface
  • impact resistant
  • well workable (contains no abrasive fillers)
1,25 ± 0,03 ca. 54
ebaboard 1750

Downloads:
  • low coefficient of linear expansion
  • good edge strength
  • high compressive strength
  • high heat resistance
  • dense surface
  • well workable
1,75 ± 0,05 ca. 43
Polyurethane - casting resins rigid Material attributes Wear jet test Pot life 200 g / 20°C
GM 708 / PUR 4

Downloads:
  • unfilled
  • slow curing
ca. 138 45 - 60
Fast casting resins, unfilled Material attributes Pot life 200 g / 20°C Curing time at RT
SG 130 / PUR 11

Downloads:
  • unfilled
  • impact resistant
  • high strength
2,5 - 3,5 0,5 - 1,5
SG 2000 / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
2,5 - 3,5 0,5 - 1
General purpose and laminating resins Material attributes Heat resistance (HDT) Pot life 200 g / 20°C
AH 110 / TGL

Downloads:
  • unfilled
  • high strength
  • high heat resistance
  • medium viscosity
101 ± 3 55 - 65
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)
PS 02 / BRIL

Downloads:
  • glassfibre filled
1,05 ± 0,02


Downloads:
  • glassfibre filled
1,05 ± 0,02
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2
Coupling pastes Material attributes Pot life 200 g / 20°C Heat resistance (HDT)
KP 6 / TGL

Downloads:
  • aluminium filled
  • heat resistant
30 - 40