Language

Your Searchresult for: Negatives
ebaboard - board material Material attributes Density at 20°C Coefficient of linear expansion
ebaboard 60-1

Downloads:
  • fine structure
  • high strength values
  • good edge strength
  • high heat resistance
  • good resistance against solvent
  • very well workable (contains no abrasive fillers)
0,60 ± 0,02 ca. 53
ebaboard S-1

Downloads:
  • very fine structure
  • high strength values
  • very good edge strength
  • high heat resistance
  • good resistance against solvent
  • very well workable (contains no abrasive fillers)
0,70 ± 0,02 ca. 62
Polyurethane - casting resins rigid Material attributes Wear jet test Pot life 200 g / 20°C
GM 708 / PUR 4

Downloads:
  • unfilled
  • slow curing
ca. 138 45 - 60
Fast casting resins, unfilled Material attributes Pot life 200 g / 20°C Curing time at RT
SG 130 / PUR 11

Downloads:
  • unfilled
  • impact resistant
  • high strength
2,5 - 3,5 0,5 - 1,5
SG 2000 / Comp. A+B

Downloads:
  • unfilled
  • very low viscosity
  • high filler content possible
  • good curing
  • very high strength
  • very heat resistant
2,5 - 3,5 0,5 - 1
Fast casting resins, filled Material attributes Pot life 200 g / 20°C Viscosity at 25°C
SG 700 / PUR 5

Downloads:
  • well castable
  • fine structure
  • dimensionally accurate
  • fast curing
  • versatile
5 - 6 900 ± 100
Epoxy casting resins Material attributes Compressive strength Heat resistance (HDT)
GH 761 / D

Downloads:
  • low viscosity
  • well castable
  • versatile
110 ± 10 59 ± 2
Polyurethane gel coats Material attributes Wear jet test Heat resistance (HDT)
OH 11 / PUR 3

Downloads:
  • abrasion resistant
  • impact resistant
  • excellent demoulding from mould and core sand properties
  • polyurethane-based
ca. 233 70 ± 2
Laminating pastes Material attributes Density at 20°C Heat resistance (HDT)


Downloads:
  • glassfibre filled
1,05 ± 0,02
PS 03-1 / resin+hardener

Downloads:
  • glassfibre filled
  • heat resistant
  • soft
0,96 ± 0,03 68 ± 2